Explanation Of Functions/Terms Used; General - Selve i-R Timer Plus Bedienungsanleitung

GB

Explanation of functions/terms used

Explanation of functions/terms used

General

Manual/automatic sliding switch
In the 'Man' sliding switch setting, only manual command controls
are carried out (e. g.: UP, STOP, DOWN by pressing the relevant
buttons).
In the 'Auto' sliding switch setting, automatic command controls
are carried out (e. g. shade function, twilight function, time, astro
function ...).
Transmission control light
A radio signal is indicated by the transmission control light being
lit.
If the battery starts running out, the transmission control light
flashes during transmission.
The transmitter power and/or radio range is reduced when the
battery is running low.
Operating mode
You see the time in the display.
OK button
When the OK button is pressed, the currently displayed values are
saved.
+/- buttons
The following operations are possible using the + and - buttons:
• Menu
• Auto mode
• + button
• - button
• + button and
• - button and
➞ change value
➞ request information
➞ next automatic switching time ▲
➞ next automatic switching time ▼
OK button ➞ astro time ▲
OK button ➞ astro time ▼
52