Damping Wind Speed And Damping Wind Direction; Indicator Type Selection; Calibration; Introduction - Vetus WSD834 Bedienungshandbuch Und Einbauanleitung

3.5.5 Damping wind speed and damp-
ing wind direction
Depending on the
setting, the average
for the period select-
ed as shown in the
table will be dis-
played.

3.5.6 Indicator type selection

St07
Pt 0
Pt 1
Pt 2
Pt 3
Pt 4
Pt 5
The wind direction is not shown in digital form
when indicator types 6 to 10 are selected.
24
10.0312
St03 St04
and :
damping period
d0
0 s
d1
4 s
d2
8 s
d3
16 s
d4
32 s
d5
64 s
:
Pt 6
Pt 7
Pt 8
Pt 9
Pt10

4 Calibration

4.1 Introduction

The following calibrations must be carried out
before using the instrument:
• Calibration of wind direction (always)
• Calibration of ship's speed (optional)
These calibrations only have to be carried out
once.

4.2 Calibrating wind direction

Calibrate the wind direction when it is wind still.
Sail in a straight line.
The (apparent) wind direction is now from
straight ahead.
Switch on the instrument (see Section 3.1).
Press the SET button
5 times.
St05
will be dis-
played briefly.
The wind direction is
shown by the num-
ber of segments from
'0' (scale is 2x 70˚,
'Close Hauled') and
in degrees from '0'.
The number of
degrees will flash.
Wind speed/ wind direction indicator WSD834
WSD834M135
WSD834M104