Operating; Switching On; Change Wind Display - Vetus WSD834 Bedienungshandbuch Und Einbauanleitung

3 Operating

3.1 Switching on

The instrument must be switched on with a
separate switch (there is no ON/OFF switch on
the instrument itself).
All segments will be
shown for 2 sec-
onds. *).
*) If the LIGHT (RESET) button is pressed and
held in until the software version is no
longer displayed all settings will be reset to
the factory settings (Default).
The software version
and RESET will be
displayed for 4 sec-
onds.
The apparent (APP)
wind speed and
wind direction will be
displayed (for exam-
ple 5.8 m/s en 35˚
port).
This is the normal
display.
The instrument must be calibrated when it is
used for the first time. See Chapter 4.
If the instrument has already been calibrat-
ed it is now ready for use. See Chapter 3
and further for how to operate.
20
10.0312

3.2 Change wind display (

Press the
select a different wind display.
When the
is displayed for 5 sec. to show that the wind
display can be changed.
Press the
twice when in normal
display.
The scale will change
from 2x 180˚ to 2x
70˚. This is termed
WSD834M101
'Close Hauled'.
and APP will flash for
5 sec.
remain displayed.
Press the
twice.
The scale will change
from 2x 70˚ to 2x
180˚.
The true (TRUE) wind
speed and
direction will be dis-
played.
This will only be
WSD834M102
displayed correctly
if the ship's speed is known and the instru-
ment receives a signal giving the speed.
TRUE will flash for 5 sec. and then remain dis-
played.
Press the
twice.
WSD834M103
The apparent (APP)
wind speed and wind
direction will be dis-
played.
APP will flash for 5
sec. and then remain
displayed.
This is back to the normal display.
Wind speed/ wind direction indicator WSD834
button twice or more times to
button is pressed once a flashing
button
CH
and then
WSD834M112
button
wind
WSD834M113
button
WSD834M114
)