Pioneer DJM-1000 Bedienungsanleitung Seite 12

BEFORE USING (PART NAMES AND FUNCTIONS)
[AUX type]
Input
EQ
CH
FADER
CROSS
FADER
41. SEND channel selector switches
Use to select the send audio from MIC, channels 1-6, and
MASTER.
42. RETURN input level adjust dials (LEVEL)
Adjusts the level of the signal returned.
(Adjustable range: –∞ to +6 dB)
43. SEND/RETURN buttons/indicators (ON)
Use to switch ON/OFF the SEND/RETURN operation of the
selected type on the selected channel.
Lights when a plug is inserted to the RETURN connector, or
when a component supporting digital link is connected to
the EFX connector. If the button is pressed when lighted,
the function turns ON and the indicator flashes. When
indicator is ON, input signal to RETURN connector is
enabled. When a digital-link component is connected to the
EFX connector, the digital link component (digital signal) is
given priority.
Link function ON/OFF section
44. VISUAL LINK button/Indicator (V)
When a digital link cable (mini DIN connector) is used to
connect a PIONEER video mixer/switcher supporting digital
link, the video mixer's cross fader can be operated using
the cross fader of the DJM-1000.
The indicator lights when the function is turned ON.
45. SOUND LINK buttons 1, 2 (SOUND 1, 2)/
indicator (S1, 2)
When this unit is connected via digital link to a PIONEER DJ
effector with digital link support (EFX-1000), and a
PIONEER DJ CD player with digital link support is also
connected via digital link cable (mini DIN connector),
setting these buttons to ON enables BPM sync functions.
The indicator lights when the function is turned ON.
12
<DRB1372>
En
SEND
RETURN
S/R LEVEL
S/R ON
MASTER
Output
FADER
46. Effector LINK buttons 1, 2 (EFX 1, 2)/Indicator
(E 1, 2)
When a digital link cable (mini DIN connector) is used to
connect this unit to a PIONEER DJ effector with digital link
support (EFX-1000), setting these buttons to ON enables
fader effect functions.
The indicator lights when the function is turned ON.
Fader start/stop ON/OFF section
47. Fader start button/indicators
(FADER START CH-1 to CH-6)
When the CROSS FADER ASSIGN switches for each
channel are used to select [A] or [B], the cross fader start/
stop function of that channel's DJ CD player are turned ON/
OFF.
When [THRU] is selected by the CROSS FADER ASSIGN
switch for each channel, the channel fader start/stop
function for that channel's DJ CD player is turned ON/OFF.
The button for each channel lights up when the fader start/
stop function is turned ON, and is turned off when the fader
start/stop function is turned OFF.