HANSGROHE AXOR Starck Gebrauchsanleitung, Montageanleitung Seite 7

Symbol description
Read the installation instruc-
tions
Beware of dangerous electrical
current
Do not use silicone containing acetic acid!
protective conductor connec-
F
tion (see page 60)
Dimensions (see page 61)
Spare parts (see page 62)
Repair (see page 61)
Cleaning
• Switch off light.
• Wipe surface with a soft dry or damp cloth.
• Ensure no moisture or fluid into the light.
• Do not use cleaners containing acids, abrasive
material or acetic acid. The cover for the light can be
removed for cleaning.After cleaning with warm soapy
water or a mild household cleaner rinse the cover with
clean watter and then polish
• Damage caused by using incorrect cleaners or misuse
is not covered by our guarantee.
English
Illuminant change
• Any work may only be carried out in a de-energized
state. Here, the voltage supply must be safely sepa-
rated via the main switch or mains plugs.
• The operator can perform the illuminant change.
• Illuminant: E14, C35 max. 40 W
• Illuminant change see page 61
7