Installation Instructions - Merrychef Mealstream EC401 Anleitung

INSTALLATION
Remove packing material and protective film from the oven.
Check for obvious signs of transit damage. If necessary, inform the supplier
IMMEDIATELY.
Remove and check accessories:
 turntable trays,  rack,  oven tray,  handle,  turntable disc,
Service registration card, operating and cleaning instruction sheet.
LOCATION AND POSITIONING
Choose a site away from major heat sources.
DO NOT position so that hot air is drawn in from fryers, grills, griddles, etc.
A heat barrier to the height of the oven must be installed if sited next to a
hob, stove or range.
Air filter
access
Place the oven on a flat surface that is LEVEL, STRONG and STABLE.
Allow a minimum of 50mm clearance above the oven for hot air to
escape and for removal of the air filter for cleaning. Allow a minimum
clearance of 50mm to the rear and each side to allow air to circulate
freely.
The air intake is located at the rear of the oven and even with the
clearance specified abov e it is important that airflow is as cool as
possible and not pre-heated by other appliances such as fryers, grills or
griddles.
Allow a sufficient clearance of 400mm in front of the oven for the door
to open fully.
Do not affix labels/stickers to oven other than those applied by the
manufacturer
Note the
minimum
recommended
clearance
required for
air flow
5
Note:
The air intake is located at
the rear of the oven, even
with the clearance specified
below it is important that
airflow is as cool as possible
and not pre-heated by other
appliances such as fryers,
grills and griddles as this
will deteriorate the life and
performance of the oven.
Do not stack the oven di-
rectly on top of another. Use
a separate shelf or double
tiered stand.
Note:
00mm is the recommend-
ed minimum clearance
between two ovens side by
side.
WARNING:
Check that the AIR FILTER is
in place prior to operation
( see Main Features )