Menukey: Changing Oven Menu Programs - Merrychef Mealstream EC401 Anleitung

menukey : CHANGING OvEN mENu PROGRAmS

The Menukey System automatically changes all the cooking programs
with the turn of a key.
To change the menus on the oven:
 Ensure the power switch is off.
 Lift the Menukey cover in the
front panel of the oven.and put
the key in the keyhole
Turn the key clockwise to the
stop ( ¼ turn ).
Do not remove the key at this
stage.
3
Switch the power switch on.
The oven will now go through
the program download
sequence by displaying the
following:
The Key Code
The number of programs and
each program number on the
key.
The programs then count down
to 0.
When the display shows 00:00,
the cavity lights up and the fans
start.
Remove the key and close the
cover. The oven is now ready to
use with the new programs.
To confirm the download is successful
Switch off the oven.
Switch on and the display briefly will show the following:
. The new key code
. 00:00 (oven ready to use)
If the download is not successful the key number will not be displayed
and a an E9 error will appear in the display if the oven is operated.
example:
Key C0
example:
7 programs
7
EPS - FAIL - REDO
External Program System
ERROR.
If the key is removed before the
download is complete or the
process is interupted the display
shows "EPS" then "FAIL" then
"REDO".Switch oven off and
begin the MENUKEY download
again.