Control Panel - Merrychef Mealstream EC401 Anleitung

CONTROL PANEL (electronic controls )
MULTI-STAGE
INDICATOR
TIME/ PROGRAM/ ERROR
DISPLAY
Menukey models
non Menukey models
PROGRAM PAD
CONVECTION PAD
POWER PADS
There are 4 Microwave Power Pads to select from: 5%,
50%, 75%, and 00%. A light will indicate the one in use.
CONvECTION PAD
This is used when foods only require browning (no micro-
wave)
Note: when cooking the MICROWAVE and CONVECTION
pads start the cycle and timer. You may alter power levels
during a manual cooking cycle. When cooking is interrupted,
a light will flash as a reminder that the time is being held (see
PAUSE).
TImE/PROGRAm SELECT PADS
These pads are used for setting the cooking time in  second
steps to a maximum of 30 minutes.
They are also used for storing 0 programs from 0-9.
( On Menukey models,00 programs 00-99 )
TEmPERATuRE SETTING PADS
These pads are used to set the convection temperature. A
light will indicate the temperature set. Selecting the '0' key
will switch convection off. If a temperature key is pressed
and held the current oven temperature will be displayed in
the time display window.
mENu kEy
The MENU KEY System automatically changes all the
cooking programs with the turn of a key.
MENUKEY
ON/OFF
SWITCH
MULTI-STAGE
INDICATOR
TIME/ERROR
DISPLAY
TEMPERATURE
SETTING PADS
TIME/PROGRAM
SELECT PADS
PROGRAM PAD
CANCEL PAD
CONVECTION PAD
POWER PADS
ON/OFF
SWITCH
CANCEL/ CALLbACk 'C' PAD
Cancels all timed cooking cycles, pre-programmed operations
and stop the microwave energy. It does not alter the oven
temperature. If the oven is hot, food will continue to cook and
should be removed from the oven immediately. This pad will
also cancel any incorrect operations. It will not erase programs.
It can also be used to view the details of stored programs.
(see CALL BACK)
PROGRAm 'P' PAD
Activate or set program
TImE AND PROGRAm DISPLAy
Shows the time set in minutes and seconds and counts down
in  second steps during a cooking
cycle.
Also displays error messages and oven temperature.
(PROBLEM SOLVING)
The program display indicates the program number se-
lected. 'PP' indicates programming
muLTI-STAGE INDICATOR
Indicates stage in multi-stage cooking
COLON
When programming the colon will flash to indicate the time
may now be entered.
ON/OFF SWITCH
ERROR DISPLAy See PROBLEM SOLVING.
0
STARBUCKS MODELS