Parts Names - Mitsubishi Electric PAR-W21MAA Bedienungshandbuch

2

Parts Names

Display Section
For purposes of this explanation, all
parts of the display are shown as lit.
During actual operation, only the
relevant items will be lit.
Identifies the current operation
Shows the operating mode, etc.
* Multilanguage display is
supported.
"Centrally Controlled" indicator
Indicates that operation of the
remote controller has been
prohibited by a main controller.
"Timer Is Off" indicator
Indicates that the timer is off.
Temperature Setting
Shows the target temperature.
Day-of-Week
Shows the current day of the week.
Time/Timer Display
Shows the current time, unless the simple or Auto
Off timer is set.
If the simple or Auto Off timer is set, shows the time
remaining.
Water Temperature Display
Shows the water temperature during
water temperature display operation.
Note:
"PLEASE WAIT" message
This message is displayed for approximately 3 minutes when power is supplied to the unit or when the unit is
recovering from a power failure.
"NOT AVAILABLE" message
This message is displayed if a button is pressed to operate a function that the unit does not have, or a function
that is not available due to the setting.
– 4 –
"Locked" indicator
Indicates that remote controller
buttons have been locked.
Timer indicators
The indicator comes on if the
corresponding timer is set.
Error indicator
Comes on when error occurs.
(Power On indicator)
Indicates that the power is on.