Other Indications - Mitsubishi Electric PAR-W21MAA Bedienungshandbuch

(4) Other Indications

<Centrally Controlled>
will be displayed when operation is controlled by central controller, etc.
Restricted operations are shown below.
• ON/OFF (including timer operation)
• Operation mode
• Set temperature
Note:
May also be individually restricted.
<Flashing "Check water circuit" display>
Indicates that the water circuit replacement is required.
Replace the water circuit.
To reset "Check water circuit" display
When the CIR.WATER button is pressed twice, "Check water circuit" display
blinks.
Then the display goes off and is reset.
Alternating
Display
<Flashing Mode Indicator>
When flashes continuously
Displayed when another unit connected to the outdoor unit is already operating in
a different operation mode.
Match with the operation mode of the other unit.
When operation mode switches after display blinked
Displayed when operation mode is restricted for each season by central controller,
etc.
Use another operation mode.
Note:
When two or more different types of unit are controlled, the water circuit
replacement period differs with the unit model. When the main unit water circuit
replacement period arrives, "Check water circuit" is displayed. When the Check
water circuit display goes off, the cumulative time is reset.
The water circuit replacement period cumulative time differs with the model.
Depending on the model, this display will not be appeared.
– 16 –