Mitsubishi Electric PAR-W21MAA Bedienungshandbuch Seite 21

[4]–3. Mode selection setting
(1) Remote controller main/sub setting
• To switch the setting, press the [
1 Main : The controller will be the main controller.
2 Sub : The controller will be the sub controller.
(2) Use of clock setting
• To switch the setting, press the [
1 ON : The clock function can be used.
2 OFF : The clock function cannot be used.
(3) Timer function setting
• To switch the setting, press the [
followings.).
1 WEEKLY TIMER (Initial setting value): The weekly timer can be used.
2 AUTO OFF TIMER : The auto off timer can be used.
3 SIMPLE TIMER : The simple timer can be used.
4 TIMER MODE OFF : The timer mode cannot be used.
* When the use of clock setting is OFF, the "WEEKLY TIMER" cannot be
used.
(4) Contact number setting for error situation
• To switch the setting, press the [
1 CALL OFF
: The set contact numbers are not displayed in case
of error.
2 CALL **** *** **** : The set contact numbers are displayed in case of
error.
CALL_ : The contact number can be set when the display is
as shown on the left.
• Setting the contact numbers
To set the contact numbers, follow the following procedures.
Move the flashing cursor to set numbers. Press the [
)] button F to move the cursor to the right (left). Press the [
(
)] button C to set the numbers.
( ) or (
(5) Temp off set setting
• To switch the following settings, press the [
1 ON : The setback amount setting is displayed under the water
temperature initial setting mode.
2 OFF : The setback amount setting is not displayed under the water
temperature initial setting mode.
ON/OFF] button D.
ON/OFF] button D.
ON/OFF] button D (Choose one of the
ON/OFF] button D.
TEMP. ( ) or
CLOCK
ON/OFF] button D.
[4]–4. Display change setting
(1) Temperature display °C/°F setting
• To switch the setting, press the [
1 °C
: The temperature unit °C is used.
2 °F
: The temperature unit °F is used.
(2) Water temperature display setting
• To switch the setting, press the [
1 ON : The water temperature is displayed.
2 OFF : The water temperature is not displayed.
– 21 –
ON/OFF] button D.
ON/OFF] button D.