Features; Names Of Parts - Mitsubishi Electric VL-50SR2-E Bedienungsanleitung

3. Features

The Lossnay ventilator, from Mitsubishi
Running the Lossnay
The Lossnay moves dirty indoor air outside
(exhausting it) and brings clean air from the
outside in (providing air supply). When it supplies
air, it brings outside air close to room temperature
(functioning as a heat exchanger).
* The Lossnay is not an air-conditioner. It is
a ventilating fan that exchanges heat as it
ventilates.
 Since it not only sends indoor air out but also
brings fresh air in, it works well in tightly sealed
homes.
 Since it is a heat exchanger, it provides heating
and cooling at a lower cost than ventilators that
merely exhaust.

4. Names of parts

Panel
Wire (fall prevention)
Remote Remote controller
controller holder
Exhaust air filter
Lossnay Core
(Heat exchanger)
Shutter knob
Remote controller
lithium battery
 Built-in filters reduce the amount of dust,
pollen and other particles entering the house in
outside air.
1
2
3
 To prevent a cold air feeling or dew
condensation forming on the unit in winter,
Exhaust only mode can be used. (Refer to
page 8 for details of the mode.)
Outside air filter
Remote controller
receiver
Hook
Eng-5
Exhaust air filter
Outside air filter
For replacement:
P-50F -E
2
Option High Performance
filter
P-50HF -E
2
Operation lamp
Display
(Remove the provided
protective sheet.)
Operating mode selection
switch