Technical Data - Milwaukee DD 3-152 Originalbetriebsanleitung

TEChNICAL DATA

DD3-152 (Diamond Drill)
Rated input .....................................................................1900 W
No-load speed, 1st gear .............................................0 - 1050 min
No-load speed, 2nd gear ............................................0 - 2400 min
No-load speed, 3rd gear .............................................0 - 4700 min
Drilling using the drill stand
Drilling capacity max. in concrete, 1st/2nd/3rd gear 152/62/32 mm
Hand-held drilling
Drilling capacity max.
in concrete, 2nd/3rd gear .......................................... 62/32 mm
in brick and tile, 1st/2nd/3rd gear....................200/112/62 mm
Tool reception ........................................................
Weight according EPTA-Procedure 01/2003 .......................6,5 kg
Weight + DR 152 T ...........................................................16,5 kg
Safety class ...........................................................................II
Degree of protection .......................................................IP 20
DR 152 T (Drill Stand)
Length of the column ......................................................1000 mm
Drilling capacity max. .......................................................152 mm
Inclination ......................................................................0 - 45 °
Weight ................................................................................10 kg
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for diff erent applications, with
diff erent accessories or poorly maintained, the vibration emission may diff er. This may signifi cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eff ects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all instruc-
tions, including those given in the accompanying brochure.
Failure to follow the warnings and instructions may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS FOR DRILLS
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handles supplied with the tool. Loss of control can
cause personal injury.
hold power tool by insulated gripping surfaces, when perfor-
ming an operation where the cutting accessory may contact
hidden wiring or its own cord. Contact with a „live" wire will also make
exposed metal parts of the power tool „live" and shock the operator.
Use protective equipment. Always wear safety glasses when working
with the machine. The use of protective clothing is recommended,
such as dust mask, protective gloves, sturdy non-slip footwear,
helmet and ear defenders.
Wear protective gloves when replacing the core bit. The core bit can
become hot after prolonged operation of the power tool.
The dust produced when using this tool may be harmful to health Do
not inhale the dust. Use a dust absorption system and wear a suitable
dust protection mask.
Noise/Vibration Information
Measured values determined according to EN 60 745.
Typically, the A-weighted noise levels of the tool are:
-1
Sound pressure level (K = 3 dB(A)) ..................................84,0 dB (A)
-1
Sound power level (K = 3 dB(A))......................................95,0 dB (A)
-1
Measured values determined according to EN 61 029.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K = 3 dB(A)) ..................................85,1 dB (A)
Sound power level (K = 3 dB(A))......................................97,0 dB (A)
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined
/ " / 1 / " UNC according to EN 60745.
1 1
2 4
Vibration emission value a
Drilling into concrete, wet ............................................14,1 m/s
Uncertainty K = .............................................................2,0 m/s
Drilling into brick and tile, dry ......................................16,3 m/s
Uncertainty K = .............................................................2,0 m/s
The built-in friction clutch only reacts to jerky locking, which is why
you should always use the additional handle.
Only plug-in when machine is switched off .
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
When working in walls ceiling, or fl oor, take care to avoid electric
cables and gas or waterpipes.
Never operate the machine without the residual current device
(PRCD) provided.
Before use check machine, cable, and plug for any damages or
material fatigue. Repairs should only be carried out by authorised
Service Agents.
Damaged mains plugs and cables must be repaired or replaced only
through a Milwaukee after-sales service agent.
Pay attention that neither persons in the working area nor the power
tool itself come into contact with the water that comes out.
After interruption of your work, restart the tool only after having
made sure that the drill bit is moving freely.
Do not use machines on any material containing asbestos.
Never lay the power tool down until the accessory has come to a
complete stop. The spinning accessory may grab the surface and pull
the power tool out of your control.
Diamond Drill
h
English
2
2
2
2
GB
GB
29