Graphical Representation - PCE -FM 200 Bedienungsanleitung

6.6

Graphical representation

In the area for the graphical evaluation, the selected unit ("N","kgf","lbf") is shown on the y axis
and the duration (in seconds) is shown on the x axis.
Moving the mouse cursor to a point on the displayed line makes a small information window
with the data (time and unit) of the currently selected measurement value pop up after a short
time.
A freely selectable part of the displayed graphics can be enlarged.
For this purpose, the corresponding icon in the toolbar ("Enlarge the graphics area ("Zooming")
or move the enlarged graphics) must be a magnifying glass .
Then, a rectangle can be drawn over a part of the graphics by holding the mouse button down.
When the mouse is released, the selected area appears as a new graphic.
As soon as at least one enlargement has been made, it is possible to switch from enlargement
mode to shift mode by clicking on the icon ("Enlarge the graphics area ("Zooming") or move the
enlarged graphics) with the magnifying glass icon.
Shift mode is represented by the icon.
If the mouse is now placed over the graphics area and then the left mouse button is pressed,
the depicted section can be moved by holding the mouse button down.
© PCE Instruments
7