OHAUS V31XH202 Bedienungsanleitung Seite 16

EN-14
Compliance to the following standards is indicated by the corresponding mark on the
product
.
Mark Standard
This product conforms to the EMC directive 89/336/EEC and the
Low Voltage Directive 73/23/EEC. The complete declaration of
Conformity is available from Ohaus Corporation
AS/NZS4251.1 Emission; AS/NZS4252.1 Immunity
NSF/ANSI 169 - 2005
NSF/ANSI /3-A 14159-1 - 2002
Important notice for verified weighing instruments
The first stage of the initial verification has been carried out at the manufacturers work. It
comprises all tests according to the adopted European standard EN 45501:1992,
paragraph 8.2.2.
If national regulations limit the validity period of the verification, the user of the weighing
instrument must strictly observe the re-verification period and inform the respective W+M
authorities
.
Weighing Instruments verified at the place of manufacture
bear one of the preceding mark on the packing label and
the green 'M' (metrology) sticker on the descriptive plate.
They may be put into service immediately.
Weighing Instruments to be verified in two stages have no
green 'M' (metrology) on the descriptive plate and bear
one of the preceding identification mark on the packing
label. The second stage of the initial verification must be
carried out by the approved service organization of the
authorized representative within the EC or by the national
weight & measures (W+M) authorities.
Valor 3000 Series Scales