PICO PicoScope 2000 Series Kurzanleitung Seite 9

Quick Start Guide
Grounding
WARNING
The scope's ground connection through the USB cable is for measurement
purposes only. The oscilloscope does not have a protective safety ground.
WARNING
Never connect the ground input (chassis) to any electrical power source. To
prevent personal injury or death, use a voltmeter to check that there is no
significant AC or DC voltage between the oscilloscope ground and the point to
which you intend to connect it.
CAUTION
Applying a voltage to the ground input is likely to cause permanent damage
to the oscilloscope, the attached computer, and other equipment.
CAUTION
To prevent measurement errors caused by poor grounding, always use the
high-quality USB cable supplied with the oscilloscope.
Environment
WARNING
To prevent injury or death, do not use in wet or damp conditions, or near
explosive gas or vapor.
CAUTION
To prevent damage, always use and store your oscilloscope in appropriate
environments.
Temperature
Humidity
Altitude
Pollution degree
Some PicoScope models have enhanced environmental specifications. Refer to the
oscilloscope User's Guide for further information.
Care of the product
The product contains no user-serviceable parts. Repair, servicing, and calibration
require specialized test equipment and must only be performed by Pico Technology or
an approved service provider. There may be a charge for these services unless covered
by the Pico five year warranty.
DO231-2
Storage
–20 °C to +60 °C
5% to 95% RH
(non-condensing)
Copyright © 2006-2015 Pico Technology Ltd. All rights reserved.
PicoScope 2000 Series Oscilloscope
Operating
0 °C to 50 °C
5% to 80% RH
(non-condensing)
2000 m (maximum)
2 (maximum)
Quoted accuracy
20 °C to 30 °C
9