Panasonic CF-VDL03U Bedienungsanleitung Seite 18

Troubleshooting
"Input Not Supported"
is displayed
Unable to input by
touching the display
The display is affected
E
The screen is shifted
horizontally or
vertically.
The display does not
display properly
1
The mode not supported is has been selected.

Set the display mode to 640 × 480 60 Hz, 800 × 600 60 Hz
or 1024 × 768 60 Hz.
Install the touchscreen driver. (

Check the cable connection to the LCD Monitor.

Confirm that the [USB Port] has not been set to [Disable]

in the Setup Utility.
The mode not supported has been selected.

Set the display mode to 640 × 480 60 Hz, 800 × 600 60 Hz
or 1024 × 768 60 Hz.
Check the cable connection to the LCD Monitor.

Select [Screen] on the OSD main menu and perform

[H-Position] or [V-Position] settings. (
Perform [Reset All Settings] on the OSD main

menu.
page 10)
page 14)