Adjusting The Lcd Monitor - Panasonic CF-VDL03U Bedienungsanleitung

Adjusting the LCD Monitor

Fine adjustment on the display size, position, and so on, may be necessary since the signal
timing differs depending on the computer.
1 Press .
The OSD main menu is displayed.
NOTE
If there is no analog RGB signal, the cable is not connected or the OSD button is

locked, the OSD main menu is not displayed.
The OSD window may not be displayed properly when pressing

press again after waiting for about 10 seconds.
When OSD is not activated and you press

OSD button will be locked. To unlock, press
.
If you do not perform the OSD button operations for more than 15 seconds while the

OSD menu is displayed, the OSD menu display will disappear automatically.
<OSD main menu>
Main menu
Screen
Conf i u r a t i o n
g
Misce l l a ne o us
Informat i o n
R e s e t A l l S e t t i n
1: Ex i t 2: Se l e c t
ICON
s
g
/ – / +
for 3 seconds while pressing
for 3 seconds again while pressing
FUNCTION
Screen
Adjust screen settings
Configuration Adjust key settings
Miscellaneous Miscellaneous settings
Information
Display system information
Reset All
Return to default settings
Settings
. In this case,
, the
DESCRIPTION
E
1