Touchscreen; First-Time Operation - Panasonic CF-VDL03U Bedienungsanleitung

Touchscreen

The LCD Monitor is equipped with a touchscreen function allowing you to perform the
same operations as the touch pad or mouse by touching the surface of the display with the
finger or stylus.
Moving the cursor
Cursor
E
Double-clicking
CAUTION
When the operation of panning is performed with the display mode larger than XGA,

the touchscreen function will not work properly.
If a change is made to the screen resolution, or the cursor can not be pointed correctly

with the finger or stylus, be sure to perform calibration.
The touchscreen function can not be used when using the full screen in [Command

Prompt].

First-time Operation

To use the touchscreen, you first need to install the touchscreen driver.

A Access the Web Site below.
http://pc-dl.panasonic.co.jp/itn/drivers/VDL03U.html
B Follow the on-screen instructions.
The calibration screen appears during installation. Touch each of the "" target marks

one by one. If the screen is closed, run [Touch Panel Settings] from the start menu, and
perform [Calibration] (
10
Clicking
Dragging
Two quick
taps
page 11).
One tap
Touch
and hold the
object (i. e. file or icon),
move the finger or stylus
on the surface (dragging
the object to the desired
location), then release
the finger or stylus.