Technical Specifications - HQ Power VDP250SC6/2 Bedienungsanleitung

WARNING
THIS FIXTURE NEEDS PERIODICAL MAINTENANCE. DUST INSIDE THE UNIT MUST BE REMOVED.
VENTILATION HOLES MUST BE KEPT CLEAN. REPLACE THE LAMP BEFORE ITS END OF LIFE. CONSULT
LAMP MANUFACTURER. INSPECT ABOVE POINTS BEFORE EACH OPERATION. NOT RESPECTING THESE
WARNINGS MAY RESULT IN OVERHEAT OR FIRE AND WARRANTY WILL VOID. READ THE MANUAL FOR
ADDITIONAL SAFETY INFORMATION BEFORE USE.

7. Technical Specifications

Power Supply
Power Consumption
Fuse
Dimensions
Total Weight
Lamp
Max. Ambient Temperature
Insulating Resistance
Max. Housing Temperature
The information in this manual is subject to change without prior notice.
VDP250SC6/2_v2
max. 230VAC / 50Hz
max. 260W
8A, 250VAC (5 x 20mm) (order code FF8N)
500 x 270 x 160mm
9kg
250W / 94V MSD GY9.5 (order code LAMP250MSD/2SYL, not incl.) or
(order code LAMP250MSD, not incl.) or (order code LAMP250MSD/2,
not incl.)
45°C
>2 M Ohms
130°C
6 VELLEMAN