Maxtor MaxAttach NAS 4100 Anleitung Seite 16

Maxtor MaxAttach NAS 4100
Changing the Server Name
When changing the name of your MaxAttach, you may use any combination of alpha-numeric characters
(without spaces).
Delete the default server name in the Server Appliance Name field. Enter a new server name. In the
DNS suffix field, enter your Fully Qualified Domain Name (FQDN) if applicable.
You may now change the Workgroup or join a existing Domain on your network. When joining an
existing Domain, the proper entry for this field is: DomainName\Administrator. The User and
Password fields are those required for the Domain you are joining.
Next, click on the OK button in the lower right hand corner.
You will be prompted to reboot the system to make the changes permanent. Select Cancel for now, as you
will be instructed to reboot the system later, after further modifications have been made.
This will return you to the Network Setup window.
Configuring Your MaxAttach NAS 4100 11