Maxtor MaxAttach NAS 4100
Notes for Advanced Users
Your MaxAttach is pre-configured in RAID5, and it is recommended that you maintain this default
configuration. However, if you prefer using a different drive configuration such JBOD or RAID 1, it is
recommended you make this change prior to beginning normal operations. If you later decide to change the
drive configuration, the drive will be reformatted and all data will be erased.
For more information on changing drive configurations, consult the MaxAttach Users Guide.
System Reboot
Once you have completed your changes, you must reboot your MaxAttach for those changes to take effect.
In the Maintenance screen, select Shutdown.
Configuring Your MaxAttach NAS 4100
15