GB-NL-F-24
Fig.13
Fig.14
A - BACKLAPPING LEVER
Sets reel rotational direction with three positions:
(a) forward for mowing, (b) reverse for backlapping
and (c) neutral. See the separate cutting unit
operator's manual for an explanation of the
backlapping procedure.
B - REEL STOP LEVER
Friction control that keeps cutting unit from bouncing
when operating over rough ground conditions.
SEAT SWITCH (not pictured)
Stops engine if the operator gets off seat with either
the cutting units engaged by means of the console
rocker switch or the transmission is out of neutral.
GB