Using The Baking Tray/Rack; Before First Use - Silvercrest SGBR 1500 A2 Bedienungsanleitung

Using the baking tray/rack

GB
WARNING! RISK OF INJURY!
► Always use the tongs
baking tray
ance or to remove it.
■ Push the baking tray
the 3 rails in the cooking chamber of the appliance.
ATTENTION! DAMAGE TO PROPERTY!
► Never place the baking tray
directly onto the heating elements
■ To remove the hot baking tray
hook the tongs
Fig. 4: Hooking the tongs
Fig. 5: Hooking the tongs
tray
8
to insert the hot
/the hot rack into the appli-
/the rack into one of
/the rack
.
or the rack
onto them as follows:
onto the rack
onto the baking
Before first use
1) Insert the plug into a mains power socket.
2) Turn the temperature control
the maximum temperature (to the stop).
3) Turn the function switch
lower heat"
4) Open the glass door
operation.
5) Remove any installed accessories from the
cooking chamber.
6) Turn the timer
NOTE
,
► The first time the appliance heats up, a
small amount of smoke and odour may be
generated due to production-related residue.
This is normal and is completely harmless.
Provide sufficient ventilation by opening a
window, for example.
The appliance switches off automatically
after 20 minutes.
If you want to interrupt the heating process
prematurely, turn the temperature control
counter-clockwise to the stop and set the
timer to "OFF - 0".
7) Allow the appliance to cool down, then clean
the appliance as described in the chapter
"Cleaning and care".
The appliance is now ready for use.
clockwise to
to "upper and
.
leave this open for this
to 20 minutes.
SGBR 1500 A2