BaByliss Fashion Curl Secret Bedienungsanleitung Seite 7

• The indicator light comes on and will start to flash.
• The indicator light will stop flashing when the appliance has heated
up to the selected temperature. The appliance is now ready to use; the
indicator light will stay on.
• Select the time setting depending on the desired curl effect. For loose
curls, select the minimal time setting. For more defined curls, select the
maximal time setting. Please refer to the table below :
8
10
12
Precautions for use
• Ensure that hair is dry.
• Clip the upper layers to the top of your head and start working on the
layers underneath.
• Separate a section of hair no wider than 3 cm. Ensure the section is
thoroughly combed through.
• Bring the appliance close to the hair and position it in the right
direction: the cavity formed by the cylinder downwards (FIG.1 and 2)
and facing the head. (FIG. 3 and 4).
• With your free hand, take hold of the tip of the section of hair and place
it on the opening, in the funnel situated between the two handles
(FIG.5).
Note: To prevent the appliance from blocking, ensure that you have no
hair lying across the edges.
Also ensure that you are not pulling your hair before activating the
handles (FIG. 6 and 7).
If these precautions are not respected, you risk catching your hair
in the appliance.
• Once the section of hair is in place, close the handles to allow the hair to
automatically enter into the appliance.
• Keep the handles closed until the beeping stops (after 3, 4 or 5 beeps
depending on the selected time setting, see the table above) (FIG.8).
• Gently release the hair from the appliance by opening the handles
(FIG.9). Don't pull on the appliance to free the hair. If you do this you
will ruin the curl effect.
• Allow your hair to cool before handling or combing it.
16_C1102AME_IB.indd 7
Time Audio beep indicator
8 seconds
10 seconds
12 seconds
3 beeps
4 beeps
5 beeps
7
Curl effect
Loose waves
Soft curls
Defined curls
18/08/16 15:14