Panasonic KX-A114EX Bedienungsanleitung Seite 6

2. Handset Common
4. Z
5. Z
U or S to display
6. Z
Display shows
7. Z
• The available base unit numbers are displayed.
8. Z U or S to select the desired base unit number 1 to 4.
• The number is assigned as the base unit number for the handset.
9. Z
10.
11. Z
• A confirmation tone sounds and the display will return to the standby mode.
• If registration is not successful within 5 minutes, an error tone sounds and display
returns to original standby mode.
• To register the handset in more than one base unit, repeat from step 1 with the other
base unit(s).
• The base unit which the handset is currently in contact with can be displayed in the
standby mode. Calls (both incoming and outgoing) can be conducted only via the
displayed base unit (even if the radio areas overlap with the neighbouring base units).
KX-A114
Y or V
"registration"
Y or V
"register hs"
Y or V
Y or V
The "Î" flashes and
"œ" flashes across the
display while the
handset registers.
Enter the 4 digit base
unit password.
Y
6
KX-A115/KX-A118
Y or V
"Registration"
Y or V
"Register H/set"
Y or V
Y or V
"Please Wait" is
displayed.
The "Î" flashes
slowly while the
handset registers.
Enter the 4 digit base
unit password.
Y