Troubleshooting - BOMANN DU 623.3 Bedienungsanleitung/Garantie Bedienungsanleitung, Garantie

Cleaning the aluminum grease filter Cleaning the aluminum grease filter
Cleaning the aluminum grease filter Cleaning the aluminum grease filter
WARNUNG: Risk of fire! WARNU WARNU WARNU NG: Risk of fire! NG: Risk of fire! NG: Risk of fire!
Grease residue in aluminum grease filter may ignite
at intense heat. Therefore, clean the grease filter
regularly!
We recommend cleaning the grease filter monthly:
• Remove the aluminum grease filter by sliding
back the lock in the handle recess, push the filter
down gently and pull out towards the front.
• Rinse the grease filter in a solution of hot water
and neutral detergent. Soak the filter in it.
• Then clean with a soft brush, rinse thoroughly with
hot water and allow drying.
• Alternatively, the grease filter can also be cleaned
in the dishwasher (up to 60°C). Slight discolora-
tion may occur. This does not affect the function
of the grease filter.
Replacing the activated carbon filter mat Replacing the activated carbon filter
Replacing the activated carbon filter Replacing the activated carbon filter
The activated carbon filter mat prevent odors and
must depend on the use, but be changed at least
every six months.
Order the carbon filter mat from your dealer or in our
online accessories shop,
Use the reference number found under "Technical
Data".
• See "Installing the activated carbon filter mat for
recirculation mode".
• Remove and dispose the old carbon filter mat.
Replacing the bulb Replacing the bulb
Replacing the bulb Replacing the bulb
WARNING: WARNING: WARNING: WARNING:
Allow the lamps to cool down before replacing the
bulbs. Risk of burns! Risk of burns!
Risk of burns! Risk of burns!
NOTE NOTE NOTE NOTE: : : :
Order the lamps from your dealer or in our online
accessories shop www.bomann- - - - germany.de www.bomann www.bomann www.bomann
mat
mat mat
www.bomann- - - - germany.de www.bomann www.bomann www.bomann germany.de. germany.de germany.de
germany.de. germany.de germany.de
L L L L amp specification: amp specification: 1 1 1 1 x x x x 2 2 2 2 W LED
amp specification: amp specification:
• Loosen the two screws of the lamp cover and
remove them.
• Carefully pull out the lamp and disconnect it from
the connection cable.
• Replace the lamp and connect the connecting
cable to the lamp.
• Replace the lamp cover and secure it.

Troubleshooting

Troubleshooting
Troubleshooting Troubleshooting
Before you contact an authorized specialist Before you contact an authorized specialist
Before you contact an authorized specialist Before you contact an authorized specialist
Problem Problem Problem Problem
Appliance is not
working or not
properly
Appliance is not
working
efficiently
Light is not
working
Oil is dripping
NOTE: NOTE: NOTE: NOTE:
If you are still having problems after following steps
above, contact your trader or an authorized techni-
cian.
21
W LED
W LED W LED
Possible Cause / Solution Possible Cause / Solution Possible Cause / Solution Possible Cause / Solution
∙ Check the power supply.
∙ Check the power level.
∙ Check the power level.
∙ Is the kitchen properly ventilated?
∙ Clean the grease filter.
∙ At recirculation mode, check the
carbon filter mat. ∙ Check the air
outlet.
∙ Check the bulb, see "Replacing
the bulb".
∙ Clean the grease filter.