Connecting Computers - G&D DL-DVI-MUX4-NT Installation Und Bedienung

Connecting computers

NOTE: To connect (up to four) computers to the KVM switch, the interfaces listed
below are available for each computer.
The DVI interfaces are placed at the top. The other interfaces are arranged in blocks
at the bottom edge.
DVI-I Monitor
CPU In 1
Line In PS/2 K/M USB K/M
Speaker
Figure 3: Interfaces for connecting the computers
If you want to output the computer's audio signals via the speakers con-
Line In:
nected to the KVM switch, use one of the audio cables to connect the computer's
Line Out interface to this interface.
NOTE:
Transmit the computer's mouse and keyboard data either via the PS/2 inter-
face PS/2 K/M or via the USB interface USB K/M.
PS/2 K/M: Connect the computer's purple PS/2
socket (keyboard) to this interface.
If required, use the optional adapter MD6M-2xMD6F
(see figure on the right) to also connect the com-
puter's PS/2 mouse socket (green) to the KVM
switch.
USB K/M: For the transmission of mouse and key-
board data use one of the USB connection cables to connect one of the computer's
USB interfaces to this interface.
USB 3.0 CPU: Use one of the USB 3.0 connection cables to connect one of the com-
puter's USB 3.0 interfaces to this interface.
DVI-I CPU: Connect the computer's video output to this interface.
Use a digital video cable to connect the video ouptut if your computer provides a
DVI-D video output. If the computer has an analogue VGA output, use an analogue
video cable.
NOTE: Multichannel devices provide further
interface.
Use further DVI cables to connect this interface to further graphics outputs of the
computer.
DVI-I CPU 1
CPU In 2
Line In PS/2 K/M USB K/M
USB 3.0 USB 3.0
DVI-I CPU 2 DVI-I CPU 3
CPU In 3
Line In PS/2 K/M USB K/M Line In PS/2 K/M USB K/M
USB 3.0
PS/2 (switch)
Mouse cable
Keyboard cable
DVI-I CPU x.y interfaces above this
G&D DL-DVI-MUX4-NT · 6
Installation
DVI-I CPU 4
CPU In 4
USB 3.0