Quax LINEA Bauanleitung Seite 31

LINEA
54 01 46xxXL
5. Assembling the bench
Needed parts : both end panels EB1 and EB2, one with dowels provided side AB1 (from step 4.1), one
longeron EB5 and the slatted bottom EB4
Step 5.1 : Use both end panels EB1 and EB2 as well as two connectors G
Tighten a connector (G) in the provided hole at the inner bottom of the end side (EB1). Repeat with the
other end side (EB2). Now you have a left (AB3 LH) and a right end side (AB3 RH).
Step 5.2 : Use the longeron EB5, two wooden dowels A and four eccentrics F
Push two eccentrics (F) in the provided drillings on the innerside of the longeron (EB5). Push a wooden
dowel (A) in the lower holes at the ends of the longeron.
Omvormbaar bed 140x70 cm
Konvertierbar Bett 140x70 cm
Lit convertible 140x70 cm
Convertible bed 140x70 cm
Quax
First dreams
®
First steps
31