Quax LINEA Bauanleitung Seite 30

LINEA
Quax
First dreams
®
First steps
Step 3 : Use the parts AB2 of step 4.2, four bottom supports C, the slatted bottom EB4 and four bolts D
Push the bottom supports (C) with their pin into the provided drillings on the end sides (AB2), check the detail.
Make sure that all of the bottom supports are positioned at the same height. Insert the bottom (EB4) into the bed.
Push the bolts (D) through the drillings in the bottom and tighten into their supports.
fi xed with screws in order to comply with the European
Step 4 : Changing the position of the mattress support
Unscrew all connections with the wood screws (B) a little. Unscrew the bottom (EB4). Replace the bottom sup-
ports (C) on a different level at the same height and replace the mattress support. Refasten the bottom with the
bolts (D) and retighten the wood screws (B). See also step 5.5.
30
54 01 46xxXL
Omvormbaar bed 140x70 cm
Konvertierbar Bett 140x70 cm
legislation.
Lit convertible 140x70 cm
Convertible bed 140x70 cm
The bottom needs to be