Placement - Klarstein 10032023 Bedienungsanleitung

PLACEMENT

Inportant Hints on Handling and Placement
• Leave around the unit at least 10 cm to all sides and 30 cm to the top.
• Do not tilt the refrigerator more than 45° during transport.
• The refrigerator shall be placed in an environment which is dry, has good
ventilation, far from direct sunshine and heat source.
• The refrigerator shall be placed on the flat and firm surface. If the ground is not flat,
adjust the adjusting leg to keep it level.
• Never place the refrigerator into a too cold environment that may get frozen.
NOTE: Removing the foam base is beneficial for bottom heat dissipation and can
avoid fire.
• When handling the refrigerator, at least two persons are required – one lifts the
top of rear part, the other one handles the bottom (if one part is clamped, it is quite
dangerous and may cause accident).
• When moving the refrigerator, the lower runner may damage and scratch the floor.
If you need to move the refrigerator for a long distance, the internal accessories
shall be fixed using adhesive tape. Otherwise, the accessories may get damaged
due to crashing each other.
• Please place the refrigerator in the position with small vibration or little exposed
to vibration. For users in the area where earthquake often occurs, please fix the
refrigerator against the wall or pole. Otherwise, the falling of refrigerator will cause
accident.
• Sufficient clearance shall be left around. If the clearance is too small or place
goods on the top or close to the side, or paste on the sides, the heat dissipation of
refrigerator will be affected, and thus to cause unnecessary electric energy waste
as well as burn out of the wall and other goods; the contact between the back and
wall will cause vibration and noise.
• Adjust the front part and adjusting leg of the refrigerator to level it. Unlevel of the
refrigerator will cause vibration and noise.
EN
19