Inserting An Sd Card - m-e VS-B10 Betriebsanleitung

VS-B10

Inserting an SD card

Switch the outdoor intercom off. Slide the SD card holder
(16) towards 'Open'. Use either your fingernail or a small
slot screwdriver to do this. Do not use too much force so that
you do not damage the SD card holder. The SD card holder
can then be flipped up and the SD card can be placed in
the card holder, contacts first. Then flip the SD card holder
with the SD card back and slide it towards 'lock' with slight
pressure. Switch the outdoor intercom back on. The card is
now ready for use and is shown in the app.
Mounting the radio gong
The radio gong is designed for mounting on a wall and it
has two hanging holes on its reverse for this purpose.
Drill two 6 mm holes at the funk gong mounting position
with 59 mm between the holes, first inserting a 6 mm
dowel and then a screw into the dowel so that there is still
2 -3 mm between the head of the screw and the wall. Then
hang the radio gong on the two screws.
Settings for the radio gong
1. Ringtone volume
Press briefly on the volume button. Each time you press
the volume reduces one level and after the lowest level
it switches back to the loudest level. 5 volume levels are
available, from 'loud' to 'sound off'.
| ENGLISH
22