Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB - ENGLISH
Operating Instructions
Dear Customer,
Many thanks for the confidence you have shown in us with the purchase of your new JET-machine. This manual has been prepared
for the owner and operators of a JET JPT-10B-M planer & thicknesser to promote safety during installation, operation and
maintenance procedures. Please read and understand the information contained in these operating instructions and the
accompanying documents. To obtain maximum life and efficiency from your machine, and to use it safely, read this manual
thoroughly and follow instructions carefully.
...Table of Contents
Thicknessing
8. Maintenance and adjustment
1. Declaration of conformity
On our own responsibility we hereby declare that this product
complies with the regulations listed on page 2.
2. Warranty
JPW (Tool) AG guarantees that the supplied product(s) is/are
free from material defects and manufacturing faults.
This warranty does not cover any defects which are caused,
either directly or indirectly, by incorrect use, carelessness,
damage due to accidents, repairs or inadequate maintenance
or cleaning as well as normal wear and tear.
Further details on warranty (e.g. warranty period) can be
found in the General Terms and Conditions (GTC) that are an
integral part of the contract.
These GTC may be viewed on the website of your dealer or
sent to you upon request.
JPW (Tool) AG reserves the right to make changes to the
product and accessories at any time.
3. Safety
3.1 Authorized use
This machine is designed for planing wood and wood derived
materials.
Machining of other materials is not permitted and may be
carried out in specific cases only after consulting with the
manufacturer.
The workpiece must allow to safely be loaded, supported and
guided.
The proper use also includes compliance with the operating
and maintenance instructions given in this manual.
The machine must be operated only by persons familiar with
its operation, maintenance and repair and who are familiar
with its hazards.
The required minimum age must be observed
The machine must only be used in a technically perfect
condition
When working on the machine, all safety mechanisms and
covers must be mounted.
In addition to the safety requirements contained in this
operating instructions and your country's applicable
regulations, you should observe the generally recognized
technical rules concerning the operation of woodworking
machines.
Any other use exceeds authorization.
In the event of unauthorized use of the machine, the
manufacturer renounces all liability and the responsibility is
transferred exclusively to the operator.
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
