Whirlpool SPIW409A2WF Gebrauchsanweisung Seite 63

3. On your remote control:
• press the WiFi button, wait a few seconds and then, press Hum%+ and Hum%- buttons
simultaneously for 3 seconds: this activates the provisioning process. The appliance is being set to a
"search" mode for a local network.
• The Connectivity icon on the air conditioner starts blinking fast.
4. Turn ON your smart device (Phone or Tablet), access your list of available wireless networks in the
setting menu.
5. The air conditioner has created a wireless network (SSID), then select it from the list of available
wireless networks. The network name is made up of the prefix "AIRCON_" followed by the MAC
address (ex. AIRCON_88_A1_23_B3_66_ C3). If you don't see it, you may need to refresh the list of
networks or verify the wifi icon is on the product display.
6. Once you have selected the SSID, password will be required . Use the SAID (see "Before starting the
set up process", point 4) as a password (ex. WPR 444441ABCD), but remove the first 3 characters.
Note: This password is case sensitive. Then connect to the network.
7. Wait until your device confirm to be connected to AIRCON network.
8. Open a web browser. If nothing appears, type "192.168.10.1" in the address bar (URL) and press
Enter. The browser display a SMART web page. It is the configuration page of the WiFi radio of your
air conditioner.
9. In the drop down list of available networks, select the name of your home wireless network.
10. If home wireless network is hidden, select "Other" (-> ) and manually enter its name (SSID) and
security protocol. Enter password for your home wireless network, if required, and submit (->).
Remember this kind of password is case sensitive.
11. Click "Submit" and wait for few seconds.
12. The wifi icon on the air conditioner should stop blinking and turn ON permanently once connected. It
can take 2 minutes the first time to connect. Otherwise, disconnect and reconnect appliance to main
power and repeat the procedure.
13. The setup process is complete.
SWITCH OFF – SWITCH ON Wi-Fi feature –to switch off the connection of the air conditioner to the
wifi network, press once the wifi button on the remote control. The wifi icon on the air conditioner
display should turn off.
To turn on again the wifi connection on the air conditioner, press the wifi button on the remote control.
When appliance is provisioned, user can disengage this function and disconnect it from the wifi network by
pressing Hum%+ and Hum%- buttons simultaneously on the remote control for 3 seconds.
To connect the air conditioner again to the home wifi network follow the procedure on paragraph 3.
63