Whirlpool SPIW409A2WF Gebrauchsanweisung Seite 44

MODE AND FUNCTION DESCRIPTIONS
6th SENSE MODE
The sensor in the indoor unit, which measures temperature and humidity in the room, keeps the room
temperature in the most comfortable level by controlling the temperature and the fan speed automatically.
Press the 6th SENSE button on the remote controller to enable it:
6th SENSE icon appears automatically on the remote control display, in cooling mode the air conditioner
will set the fan speed to auto, adjust the temperature and humidity automatically according to the
enviroment.
1. The unit will automatically sense the outdoor air tempearture every 3 hours and select the
operation mode for you, detail see below table.
Outdoor temperature range
25°C Tod
22°C Tod < 25°C
22°C < Tod
Tod is= outdoor enviroment temeprature.
Note: Mode cannot be switched manually under 6th SENSE function.
2. In cooling mode, unit will automatically set a comfortable temperature and humidity for you,
you can adjust it base on your need, to adjust temperature by pressing the
on remote control. On the display , "0" to indicate the default, other number (-3, -2, -1, 0, 1, 2, 3)
corresponding to tempearture change as below:
Outdoor temperature range
30°C Tod
25°C Tod < 30°C
22°C < Tod
3. After setting the desired temperature, there will be a new humidity setting display. You can
press the and
default setting.
Mode setting
COOLING
FAN ONLY
HEATING
Default mode
COOLING
COOLING
HEATING
to change the setting, the range is from -15% to 15% based on the
Default setting
22°C
21°C
22°C
44
and button
Max Min
25°C 19°C
24°C 18°C
25°C 19°C