Additional Safety Rules For Tool; Electrical Safety; Parts Identification - Makita 6723DW Bedienungsanleitung

ADDITIONAL SAFETY RULES FOR TOOL

1. Be aware that this tool is always in an operating condition, because it does not have to
be plugged into an electrical outlet.
2. Hold tool by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring. Contact with a "live" wire will also make
exposed metal parts of the tool "live" and shock the operator.
3. Always be sure you have a firm footing. Be sure no one is below when using the tool in
high locations.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
SAVE THESE INSTRUCTIONS.

ELECTRICAL SAFETY

WARNING: Read these safety instructions carefully before connecting
the charger to the mains supply. Make sure that the voltage of the
electricity supply is the same as that indicated on the rating plate on
the charger.
This charger has been designed to operate on 230 V AC 50 Hz.
Connecting it to any other power source may cause damage to the
tool. Do not allow the cordless screwdriver to be exposed to rain or
moisture.
This symbol indicates that this charger is a Class
does not require an Earth connection.

PARTS IDENTIFICATION

1. LED light
2. LED light On/Off switch
3. Forward / reverse selector and On/Off switch
4. Screwdriver bit holder
5. Handle folding bush
6. Carrying strap
7. Charging socket
8. Charging adaptor
9. Charging plug
10. Carrying / storage case
6
ENB026-1
appliance and
II