PMR 23 GB_271112_dtp 27.11.12 14:51 Seite 8
Operating the Walkie-Talkies
Confirmation signal
The confirmation signal is issued on releasing the PTT button.
This signals to the caller that you have ended transmission.
Selecting a channel
Channel Frequency (MHz)
1
2
3
4
Monitoring the current channel
Normally the walkie-talkie will not pick up very weak signals. But you can
monitor the current channel for all sounds.
Scanning channels
When the Scan function is turned on, the handset will continuously scan
through all eight channels until it finds one on which another user is trans-
mitting.
8
Press the menu key.
or ▼ to select the desired channel.
Press
/
Press the menu key again to confirm.
446.00625
446.01875
446.03125
446.04375
Press the menu key and the key ▼simultaneously.
+
RX
will be displayed on the LCD screen.
Press the menu key again to stop monitoring.
Press the menu key and the key
+
S
will be displayed on the LCD screen.
When a signal is detected the unit will pause.
Press the PTT button to stop the scan and communicate
or
Channel Frequency (MHz)
5
446.05625
6
446.06875
7
446.08125
8
446.09375
simultaneously.