PMR 46 GB_041212_dtp 04.12.12 12:33 Seite 12
Operating the Walkie-Talkies
Scanning channels
When the Scan function is turned on, the handset will continuously scan
through all eight channels until it finds one on which another user is trans-
mitting.
5 x
Scanning subchannels (CTCSS)
With this function activated the handset will continuously scan through all
subchannels (CTCSS) for the preset channel until it finds one on which
another user is transmitting.
6 x
Scanning DCS
With this function activated the handset will continuously scan through all
DCS channels for the preset channel until it finds one on which another
user is transmitting.
7 x
12
Press the menu key 5 times.
or ▼ to start scanning.
Press
/
When a signal is detected the unit will pause.
or ▼ to continue scanning.
Press
/
Press the PTT button to communicate or to quit scanning
mode.
Press the menu key 6 times.
or ▼ to start scanning.
Press
/
When a signal is detected the unit will pause.
or ▼ to continue scanning.
Press
/
Press the PTT button to communicate or to quit scanning
mode.
Press the menu key 7 times.
or ▼ to start scanning.
Press
/
When a signal is detected the unit will pause.