Dual Watch Mode - AUDIOLINE Power PMR 46 Bedienungsanleitung

PMR 46 GB_041212_dtp 04.12.12 12:33 Seite 14
Operating the Walkie-Talkies

Dual Watch Mode

With the dual watch mode activated two channels of your choice are wat-
ched alternately. If a signal on one of these channels is detected the dual
watch mode is interrupted and you can take part in the communication on
this channel.
11 x
14
Select the first channel (current channel).
/
Press the menu key 11 times. DCM appears on the dis-
play and „OF" is flashing.
Select the second channel.
/
Press the PTT button to start the dual watch mode
or
Press the menu key.
Select the CTCSS code for the second channel.
/
Press the PTT button to start the dual watch mode
or
Press the menu key.
Select the DCS code for the second channel.
/
Press the PTT button to start the dual watch mode.
For deactivating the Dual Watch Mode press the menu
key 11 times, select "OF" and press the PTT button.