The Utility Program; Running "Connect It - Sony SFD200S Bedienungsanleitung

The Utility Program

The Utility Program
The "Connect It" utility program is supplied with the HiFD
drive.
It is installed in the SONY HiFD Group or folder, selected in
the Programs Menu, during installation. The following is based
on Windows 95/98.
DOS & Windows 3.x have no "Connect It".

Running "Connect It"

Click the task bar's Start button, point to Programs, then
SONY HiFD, and click Connect It.
HiFD drive's displayed properties depend on it being powered-
on when PC was started.
If power was supplied, [Connected] appears in the [Device] of
[Properties] box. Port address, IRQ and read/write mode of
HiFD also appear in this box.
If power was not supplied, [Disconnected] appears in the
[Device] of the [Properties] box.
20