Getting Started; Installing The Batteries - Sony SRF-DR2000 Bedienungsanleitung

"Getting Started

Installing the Batteries

Open the battery compartment lid and insert two R6 (size AA)
batteries (not supplied) with the correct polarity.
DC IN 3V
Battery Life
Audio only
FM multiplex reception
* For maximum performance we recommend that you use alkaline
batteries.
When to Replace the Batteries
Replace the batteries when "LOW BATTERY" is displayed.
Notes
• Insert the batteries with correct polarity.
• The dry batteries cannot be charged.
• Turn off the radio, and then replace the batteries within 20
seconds after the batteries are removed from the battery
compartment. Otherwise, the information that has been saved
and the preset stations will be erased. In this case, preset the
stations again. Be sure to take note of your important data that is
saved in the memory.
• When you are not going to use your unit for an extended period
of time, remove the batteries to prevent possible damage from
battery leakage and corrosion.
÷
Sony Alkaline LR6(SG)
35
23
R6 (size AA) × 2
(Approx. hours)
Sony R6(SR)
14
9
5-
GB