Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IR Control
Modifications occur in steps. Please do not hold the buttons, rather press repeatedly.
Setting DMX mode via IR Remote Control
You must set the DMX Channel mode before you address the fixture via remote control.
To select your desired DMX channel, press the DMX mode button (D), then via the Up or Down buttons, you
can choose between the DMX modes "CH05, CH07, CH26".
The starting address can now be defined via the remote control and is the first channel from which the
device will respond to the controller.
Example for setting the DMX starting address 007:
Step 1: Turn off the DMX-controller.
Step 2: Press button S on the remote control. The red and green LEDs flash 2-3 times, indicating you can
start setting the address.
Step 3: Press button 0. The green LED lights up. The setting of the 100
Step 4: Press button 0. The blue LED lights up. The setting of the 10
Step 5: Press button 7. All LEDs flash 2-3 times. The setting of the 1
When all LEDs flash, then the DMX address is correct and DMX mode begins automatically. If the address is
wrong, then the red LED will light up and a new DMX address should be entered.
Please make sure that you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture on the DMX data link. If two, three or more devices are addressed
similarly, they will work similarly.
After having addressed all devices, you may now start operating these via your lighting controller.
FUNCTION
Manual color adjustment
via the brightness of the RGB LEDs
Automatic change
speed for change of color adjustable
Sound-controlled color change*
*only available for indoor models
Programs
7 static colors; color change and color
fade with adjustable speed
Flash
speed of flash adjustable
Black Out
turns
LEDs
on and off
DMX starting address
DMX controlled mode
Slave mode
29/32
BUTTON
-
+
R
-
+
G
-
+
B
A
-
+
SP
SA
-
+
PROG
-STATIC TUBE: ALL/XX = 1 color
on all tubes
-STATIC TUBE: 01~08 = 1 color on
the respective tube
+
SP
+
F
S
0
9
D
SL
th
figure was successful.
th
figure was successful.
st
figure was successful.
00090356, Version 1.0
MODE
-
-
Werbung
Inhaltsverzeichnis
