Handling And Operation; Inserting The Filter - Beem Robustica Bedienungsanleitung

EN

Handling and Operation

NOTES
• Do not pour milk or other liquids into the water tank. Only ever use water to make
coffee!
• Never overfi ll the permanent fi lter.
Time
As soon as the mains plug is plugged into a plug socket, the display lighting turns on and
the time display 0:00 starts fl ashing. The clock has a 12-hour time format (AM / PM).
1. Set the hours by pressing the S button (14). Note the AM or PM specifi cation! (AM
represents the time from midnight to 11:59 in the morning, PM represents the time
from midday to 11:59 (23:59) at night).
2. Set the minutes by pressing the M button (13).
Hold down the respective button to run through the hours / minutes quickly.
The time is saved until a new time is set or the device has been disconnected from
the power supply.
Filling the Water Tank
1. Open the lid (1).
2. If necessary, remove the fi lter insert using the handle.
3. Take out the coffee tank (2) by the handle.
4. Pour the quantity of water required for the number of cups you want (maximum 14
cups) into the coffee tank. Pay attention to the fi ll-level indicator in the coffee tank!
The coffee cup symbol on the fi ll-level indicator indicates the maximum fi ll level and
corresponds to 14 cups each containing 125 ml.
5. Transfer the water from the coffee tank to the water tank (7) (Picture A).
6. Place the coffee tank back in the device.
7. Place the fi lter insert back in the device.
8. Close the lid.

Inserting the Filter

1. If you have not already done so, insert the fi lter insert into the coffee tank (2).
2. Insert the permanent fi lter or a basket fi lter paper into the fi lter insert.
3. Close the lid (1).
03840_DE-EN-FR-NL_A5_V2.indb 26 03840_DE-EN-FR-NL_A5_V2.indb 26
26
27.09.2017 08:25:10 27.09.2017 08:25:10