Installation - Klarstein 10031524 Bedienungsanleitung

1 Power Button: To turn on/off the power supply
• Display screen: to show the reminding time
and the state(running state, delay time etc).
• Rinse Aid indicator
penser needs to be refilled.
2
• Add salt indicator
penser needs to be refilled.
• Delay time:24hours option.
• Program indicators.
• The installation position of dishwasher should be near the existing inlet and drain hoses and power cord.
• One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of the dishwasher.
Positioning the Appliance
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides,
along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be
positioned to the right or the left to facilitate proper installation.
Power Cennection
Ensure the voltage and frequency of the power being corresponds to those on the rating plate. Only insert the
plug into an electrical socket which is earthed properly. If the electrical socket to which the appliance must be
connected is not appropriate for the plug , replace the socket, rather than using a adaptors or the like as they
could cause overheating and burns.
23
Indicates when the dis-
Indicates when the dis-

Installation

3 Delay Button : To press the button to delay.
Washing Program Selector: Press the button
4
to select wash cycles.
Start/Pause Button: Press this button to start
5
or pause the dishwasher.