Specifications - Makita DUB142 Betriebsanleitung

ENGLISH (Original instructions)
1. Red part
2. Button
3. Battery cartridge
4. Indicator lamps
5. CHECK button

SPECIFICATIONS

Capacities
No load speed (min
Overall length
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
........................ Take particular care and attention.
........... Read instruction manual.
............ Keep a hand away from rotating
parts.
..................... Danger; be aware of thrown objects.
..................... Keep bystanders away.
..................... Wear eye and ear protection.
..................... Do not expose to moisture.
Cd
............... Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment
or battery pack together with
household waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries
and Accumulators and Waste
Batteries and Accumulators and their
implementation in accordance with
national laws, electric equipment and
batteries and battery pack(s) that
have reached the end of their life
must be collected separately and
Explanation of general view
6. Pointers
7. Air volume adjusting dial
8. Switch trigger
9. Nozzle
10. Blower outlet
Model
Air pressure (water column)
Air volume
-1
)
Net weight
DUB142
D.C. 14.4 V
END012-4
Intended use
The tool is intended for blowing dust.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Electrical Safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
11. Dust bag
12. Suction inlet
13. Fastener
0 - 550 mm
3
0 - 2.6 m /min
0 - 18,000
509 mm
1.6 kg
returned to an environmentally
compatible recycling facility.
DUB182
1.7 kg
D.C. 18 V
BNE018-1
GEA006-2
3