Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning; Maintenance; Storage; Technical Data - Grizzly EFB 401 Originalbetriebsanleitung

Elektrische fugenbürste
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
GB

Cleaning

Do not jet water onto the trimmer
and do not clean it under flowing
water. This would result in the
danger of an electric shock and
the trimmer could be damaged.
Always keep the device clean. Do no
use cleaning agents and solvents.
Clean the device, brush and splash
guard with a soft brush or cloth after
every use.
Keep the louvres clean.

Maintenance

• Only use spare parts and acces-
sories that have been supplied or
recommended by the manufac-
turer.
• Always inspect the equipment
before it is to be used. Do not
operate the equipment if safety
devices, parts of the cutting device
or bolts are missing, worn out or
damaged.
• Always inspect the brush before
starting the device. Never use
damaged brushes. Replace any
damaged or worn brush.
22

Storage

Store the appliance in a dry place well
out of reach of children.
Do not expose the device for ex-
tended periods to direct sunlight. This
could damage the device.
Do not wrap plastic sacks around the
appliance as this could result in the
formation of moisture and mould.

Technical data

Electric weed sweeper ...............EFB 401
Rated input voltage ..............230 V~, 50 Hz
Power input ........................................400 W
Protection class .....................................
Protection category ................................IP20
Idling speed ................................. 2800 min
Max. brush engine speed ............ 4500 min
Weight ............................................... 2.5 kg
Sound pressure level
(L
) ....................68.0 dB(A); K
pA
Sound power level (L
guaranteed .............................. 92 dB(A)
measured ........88.0 dB(A); K
Vibration (a
) ........... 3.5 m/s
n
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
= 3 dB(A)
pA
)
WA
= 3 dB(A)
wA
; K = 1.5 m/s
2
II
-1
-1
2

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis