cable can be inspected for dam-
age.
•
Use the envisaged cable sus-
pensions when attaching an
extension cable.
•
Never carry the equipment by
its power cable. Never pull the
cable to disconnect the plug
from the mains socket. Protect
the cable from heat, oil and
sharp edges. The mains power
cable could be damaged.
General description
The illustrations can be found on
page 2.
Extent of the delivery
Carefully unpack the trimmer and check
that it is complete. Dispose of the packag-
ing material correctly.
•
Device
•
Brush box with 3 crosshead screws
•
Guiding roller
•
Additional handle
•
2 operating brushes
•
Translation of the original
instructions for use
Survey
1 Handle
2 On/off switch
3 Strain relief
4 Power cable
5 Additional handle
6 Screw socket for length adjust-
ment
7 Telescopic arm
8 Motor head
9 Brush box
10 Splash guard
11 Guiding roller
12 Narrow metal brush
13 Narrow plastic brush
Functional description
The hand-operated electrical weed sweep-
er is equipped with an electric motor.
Depending on the application require-
ments, two different brushes can be used
for cleaning joints.
The telescopic arm enables a comfortable
operation in an upright posture.
Please refer to the descriptions below for
information about the operating devices.
Assembly instructions
Always disconnect the power ca-
ble and wait until the brush has
stopped completely, before per-
forming any work on the device.
Injury hazard!
Mounting the brush box:
Place the brush box (9) on the motor
head (8) and attach it, using the in-
cluded crosshead screws.
Inserting/replacing the brush:
1. Push the brush support (14)
towards the motor head (8) and
insert the desired brush (13).
2. Release the brush support (14)
to let it return to the initial posi-
tion.
3. To remove the brush, push the
brush support (14) and remove
the brush.
GB
19