Practical Tips; Selecting The Proper Brush; Cleaning And Maintenance - Grizzly EFB 401 Originalbetriebsanleitung

Practical tips

Caution, risk of Injury!
• Always inspect the brush before
starting the device. Never use
damaged brushes. Replace any
damaged or worn brush.
• Use original brushes only.
• Never operate the device in rain
or on wet ground. Operating the
device in rain or on wet ground
can cause an electric shock.
• Always move across the slope
when working on hills.
• Never cross the extension cable
while the device is operating.
Always keep the extension cable
behind the device operator.
• Avoid any contact with fixed
obstacles (rocks, walls, picket
fences, etc.) in order to prevent
damages to the device.
• Switch off the device during
breaks or when transporting
it and wait until the brush has
completely stopped rotating.
Using the device:
Never move the brush across tile,
wood, plastic or other flooring ma-
terial. The brushes could scratch
or damage the surface. We do not
assume any liability for damages in
this case.
• Operate the device at walking speed.
• The icons
indicate the brush's centre position.
They help aligning the device during
operation.
• The arrow
indicates the brush's rotational direc-
tion.
on the brush box
on the brush box

Selecting the proper brush

For information on replacing the brush,
please refer to the "Assembly instructions"
section.
Steel brush (see illustration
Select this brush for removing persistent
lichenics and moss on robust grounds.
Use the steel brush on robust sur-
faces only (road, pavement) as it
may damage and/or scratch the
ground.
Narrow plastic brush (see illustration
13):
Select this brush for removing weed,
lichenics and moss from small narrow
joints.
Wide brush (optionally available):
Select this brush for removing weed, li-
chenics and moss from wide joints and für
cleaning smaller areals.
Cleaning and
maintenance
Always disconnect the power ca-
ble and wait until the brush has
stopped completely, before per-
forming any work on the device.
Injury hazard!
Any work that is not described in
these Instructions must be car-
ried out by a servicing agency
authorized by us.
Danger of injury!
GB
12):
21