GUTMANN Sombra Montageanleitung Seite 17

10. Now hang the hood body against the
ceiling at the suspension points (G) and
fix it in place with the washer and nut.
11. Connect the support plate to the
exhaust air duct and screw to the hood
body.
12. Make the electrical connection.
(Extraction mode) If using an external
blower motor, connect up the connecting
cable.
(
13. Insert and screw the filter insert into
the hood body.
14. Carry out a functional test!
The hood must be retested if an er-
ror message appears on the control
panel! Security 10 sec. Switch off!
en
17