GUTMANN Sombra Montageanleitung Seite 16

en
4. Mark the position for the mounting
holes (G) on the ceiling. With special
designs, the dimensions should be
taken directly from the appliance.
5. Drill four holes (Ø 10 mm) and insert
the wall plugs.
6. Screw the hanger bolts into the wall
plugs until approx.. 20 mm protrude.
7. Now release the filter insert (B) from
the hood body (A). To do this, remove
the M5 screws (10 pcs.) between the
support frame and glass front.
Then carefully remove the filter insert
downwards.
16
8. Disconnect the electrical connection in
the appliance.
9. Release the 4 screws of the support
plate with connection nozzle (D) and
remove the support plate.